Consumibles de Soldadura

Atom Arc 8018 electrodes deposit 1% Ni weld metal. They are used primarily to weld high-tensile steels in the 70-80 ksi (483-552 MPa) tensile strength range, especially where notch toughness at temperatures as low as -40 ... [Leer mas]

Atom Arc 8018-C1 electrodes deposit weld metal which contains nominal 2.33% Ni. Their principal use is in the welding of nickel-bearing steels for low temperature applications where toughness of the weld metal at low t ... [Leer mas]

Atom Arc 8018-N electrodes produce excellent weld properties and are used to fabricate components where low temperature notch toughness values are required. Atom Arc 8018-N is also recommended for welding the 2% to 4% ... [Leer mas]

E6010. Electrodo universal, celulósico de muy buena penetración para soldadura em toda posición.
[Leer mas]

E6011. Electrodo celulósico, indicado para soldadura en toda posición, incluso en VD, usando CA.
[Leer mas]

E6012. Electrodo rutílico de fácil manejo cuando se suelda en posición.
[Leer mas]

E6013. Electrodo rutílico, para soldadura em chapas finas y soldadura de filete.
[Leer mas]

E7015. Electrodo básico, apto para cañerías de alta presión incluyendo la pasada de raíz en toda posición excepto vertical descendente.
[Leer mas]

E7016. Electrodo básico, diseñado para operar con CA, cordones levemente convexos, de penetración media y calidad radiográfica.
[Leer mas]

E7018-1. Electrodo básico, con polvo de hierro em su revestimiento. Excelente propiedad de impacto a baja emteperatura.
[Leer mas]

E7024. Electrodo rutílico de alto rendimiento para uma elevada velocidad de deposición.
[Leer mas]

[Leer mas]

Electrodo para cortar y remover todo tipo de metales sin necesidad de utilizar oxígeno ni aire comprimido.
[Leer mas]

[Leer mas]

EFeMn-A. Electrodo rutílico básico, que endurece superfcialmente con servicio de impacto pesado y abrasión.
[Leer mas]

E10-60 RZ. Resistente al desgaste por abrasión severa y al rozamiento.
[Leer mas]

E10-60 RZ. Resistente al desgaste por abrasión severa y al rozamiento, con mayor duración y resistencia al impacto.
[Leer mas]

E10-65 RZ. Electrodo básico, se aplica en recubrimiento de partes sujetas a muy alta abrasión a altas temperaturas.
[Leer mas]

E1-350. Electrodo rutílico apto para combatir el rozamiento intermetálico.
[Leer mas]

Optima combinación de resistencia al aplastamiento, tenacidad y resistencia al desgaste.
[Leer mas]

Electrodo que deja un depósito de estructura martensítica mecanizable.
[Leer mas]

Alambre E71T-11 para soldadura sin gas de protección en CC-.
[Leer mas]

[Leer mas]

FCAW wire for mild steel and 490N/mm2 class high tensile strength steel. Dual Shield 7100 is a multi-purpose all position flux cored wire for use with CO2 gas.
[Leer mas]

[Leer mas]

Dual Shield T-115 is a basic slag flux cored electrode designed for applications requiring a high strength weld deposit. Dual Shield T-115 produces weld deposits which are resistant to cracking in heavy sections or und ... [Leer mas]

Nicore 55 is a composite metal cored wire for repair and joining of cast iron materials. The deposit, which is approximately 53% iron and 45% nickel, provides an excellent match for the coefficient of expansion exhibit ... [Leer mas]

E6013. Electrodo rutílico para uso general em todas las posiciones.
[Leer mas]

OK 48.04 is an AC/DC, general purpose, LMA electrode for welding mild and low-alloy steels. It has very good welding properties and deposits a high quality weld metal with very good mechanical properties. The electrode ... [Leer mas]

Electrodo básico con excelentes características de soldabilidad.
[Leer mas]

Electrodo rutilico E308L-17 para aceros inoxidables resistentes ao calor.
[Leer mas]

Electrodo rutilico E316L-17 para soldadura en aceros estabilizados no sujetos a ataque corrosivo muy severo
[Leer mas]

Electrodo rutílico E310-16 para soldadura de aceros de difícil soldabilidad, soldadura de aceros austeníticos
[Leer mas]

Electrodo básico que deposita acero tipo 19/9 AlMn
[Leer mas]

Electrodo rutílico E309L-17 para soldadura de aceros disímiles e inoxidables con composiciones similares.
[Leer mas]

[Leer mas]

OK 68.15 is a stainless-steel electrode which deposits a ferritic 13Cr weld metal. OK 68.15 is designed for welding steels of similar composition, when CrNi-alloyed austenitic stainless steel electrodes cannot be used, e.g. ... [Leer mas]

Electrodo rutílico E312-17 ideal como camada previa antes del revestimiento duro.
[Leer mas]

[Leer mas]

[Leer mas]

[Leer mas]

OK 75.75 is an LMA electrode dried to a very low moisture content and suitable for the welding of high-strength, low-alloyed steels, at room temperature or with moderate preheating.
[Leer mas]

OK 76.18 is an LMA electrode for welding creep-resistant steels of the 1.Cr0.5Mo type. The electrode welds with a quiet, stable arc and produces a minimum of spatter loss. OK 76.18 deposits a weld metal which is resist ... [Leer mas]

OK 76.28 is an LMA electrode for welding creep-resistant steels containing approx. 2.25Cr1Mo. The electrode runs with a quiet, stable arc and produces a minimum of spatter loss. OK 76.28 deposits a weld metal with good ... [Leer mas]

[Leer mas]

[Leer mas]

OK Aristorod 12.50 is a bare Mn-Si-alloyed G3Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive components, pressure vessel fabrication and shipbuilding. OK Aristorod 12 ... [Leer mas]

Copper-coated, unalloyed wire for Submerged Arc Welding. For low requirements or in combination with high Si and Mn alloying fluxes. Suitable for non- and low alloyed steels.
[Leer mas]

Copper-coated, unalloyed wire for Submerged Arc Welding. Suitable in combination with most fluxes. Increased Si content and thus especially for neutral fluxes (e.g: OK Flux 10.62) or in order to increase the fluidity of ... [Leer mas]

Mo-alloyed, copper-coated wire for Submerged Arc and Electroslag Welding. For creep resistant steels (0,5% Mo), structural steels, ship building steels, pressure vessel steels, pipeline steels up to X80, high strength steels, etc.
[Leer mas]

ER70S-6. Alambre Cobreado para la soldadura de aceros estructurales en general.
[Leer mas]

A continuous solid, corrosion resisting chromium-nickel-manganese wire for welding of austenitic stainless alloys of 18% Cr, 8% Ni, 7% Mn types. OK Autrod 16.95 has a general corrosion resistance similar to that of the ... [Leer mas]

A continuous, solid, copper wire for the GMAW joining of copper-zinc alloys and low-alloyed copper and for the GMAW brazing of zinc-coated steel sheets. OK Autrod 19.30 is alloyed with silicon and manganese and has good ... [Leer mas]

A continuous solid corrosion resisting chromium-nickel wire for welding of austenitic chromium nickel alloys of 18% Cr - 8% Ni-type. OK Autrod 308LSi has a good general corrosion resistance. The alloy has a low carbon ... [Leer mas]

A continous solid corrosion resistant chromium-nickel wire for welding of similar steels, wrought and cast steels of 23% Cr-12% Ni types. The alloy is also used for welding of buffer layers on CMn steels and welding of ... [Leer mas]

A continuous, solid, corrosion-resistant, chromium-nickel-molybdenum wire for welding austenitic stainless alloys of the 18% Cr -8% Ni and 18% Cr -10% Ni -3% Mo types. OK Autrod 316LSi has good general corrosion resistance; ... [Leer mas]

OK Autrod 4043 is one of the most widely used welding and brazing alloys and can be classed as a general purpose filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a pref ... [Leer mas]

OK Autrod 5356 is the most widely used welding alloy and can be classified as a general purpose type filler alloy. OK Autrod 5356 is typically chosen because of its relatively high shear strength. The 5XXX alloy base material, ... [Leer mas]

Flujo aleado para revestimiento duro y formación de placas resistentes al desgaste abrasivo en CC+.
[Leer mas]

[Leer mas]

[Leer mas]

Agglomerated fluoride-basic flux for Submerged Arc Welding. Primarily for multi-run welding. For highest demands on impact properties, low temperature toughness, strength and CTOD-values. Especially suitable for narrow ... [Leer mas]

OK Flux 10.71 is an agglomerated, basic flux for submerged arc welding. It is used for single and multi-run welding of all plate thicknesses. It can be combined with a wide range of solid wires and cored wires and thus ... [Leer mas]

OK Flux 10.72 is an agglomerated, basic flux, designed for the production of wind towers. It combines the high demands for multi-layer thick section welding, using high deposition rates with respectable toughness values ... [Leer mas]

Flujo activo, para elevada velocidades de soldadura en CC+/CA.
[Leer mas]

Basic, agglomerated flux for butt welding of stainless steels. A suitable flux for welding of high alloyed CrNi-steels like e.g. duplex stainless steel. The low Si addition during welding provides good mechanical prope ... [Leer mas]

OK Flux 350 is an active bonded flux for making butt and fillet welds in carbon steel plate up to 1" (25 mm) thick. It produces a smooth weld surface with uniform edges. The slag is generally free peeling. Its performa ... [Leer mas]

Flujo neutro, indicado para uso en CA y CC+ en soldaduras con uno o más alambres y presenta buen rendimiento hasta 1.000 A.
[Leer mas]

OK Tigrod 12.60 is a copper-coated Mn-Si-alloyed W2Si/ER70S-3 solid rod for the GTAW of non-alloyed steels, as used in general construction, pressure vessel fabrication and shipbuilding.
[Leer mas]

A triple deoxidized copper-coated rod designed for GTAW of mild and fine grained structural and pressure vessel steels as well as shipbuilding steels. The rod is capable of producing high quality welds in semi-killed a ... [Leer mas]

OK Tigrod 13.16 is a 1.3Cr-0.5Mo-alloyed (ER80S-B2), copper-coated rod for the GTAW of creep-resistant steels like SA-387 Grade 11, A 335 Grade P11 or similar materials. The rod has a high purity chemistry with a guara ... [Leer mas]

[Leer mas]

[Leer mas]

[Leer mas]

OK Tigrod 4043 is one of the most widely used welding alloys. The alloy is used for welding AlMgSi - types and AlSi - alloys with up to 7% Silicon. Not recommended for anodizing. Non-heat treatable.
[Leer mas]

OK Tigrod 5356 is the most widely used welding alloy and can be classified as a general purpose type filler alloy. OK Tigrod 5356 is typically chosen because of its relatively high shear strength. The 5XXX alloy base material, ... [Leer mas]

Alambre tubular del tipo "Metal Cored" de baja emisión de humo y aplicaciones donde se requiere propiedad de impacto hasta -29°C.
[Leer mas]

Alambre tipo "metal cored" que posibilita elevada eficiencia y tasa de deposición.
[Leer mas]

Alambre básico, que deposita un metal de soldadura con características similares a las de un electrodo revestido básico E7018 (bajo Hidrógeno).
[Leer mas]

Alambre rutílico, con elevadas tasas de deposición cuyo resultado es la gran productividad.
[Leer mas]

Alambre tipo "flux cored" designado para soldaduras, fabricación y reparación de calderas, tubos y supera calefactores que trabajan entre 400 y 500°C.
[Leer mas]

[Leer mas]

Alambre rutílico desarrollado especialmente para soldar aceros que adquieren pátina resistentes a la corrosión.
[Leer mas]

Alambre tipo "Flux Cored" básico indicado para aplicaciones en aceros de media/alta resistencia hasta 700MPa.
[Leer mas]

Shield-Bright 312 was developed for welding of high carbon steels and for the first layer cladding of carbon and low alloy steels. The best results are obtainable when the “buttering” technique is used. Shield-Bright 3 ... [Leer mas]

Shield-Bright 308L is a rutile cored wire designed for the all-positional welding of stainless steels excluding vertical down. In addition to the 304L and 308L grades it is also suitable for welding the stabilised 321 ... [Leer mas]

Shield-Bright 309L is a rutile cored wire designed for the all-positional welding, except vertical down, of stainless steels to carbon or low alloy steels and for the first layer cladding of carbon and low alloy steels ... [Leer mas]

Shield-Bright 316L was developed for the welding of Type 316L stainless steel but can be used for other stainless steels including Types 316 and 304L. In a few cases, e.g. nitric acid service, Shield-Bright 316L should ... [Leer mas]

El electrodo Stoodite 6 es resistente a muchas formas de degradación química y mecánica en un amplio rango de temperaturas. El electrodo 6 de Stoodite, que contiene la aleación de cobalto más usada, cuenta con excelent ... [Leer mas]

El electrodo Stoody 50, compuesto de una aleación a base de níquel, tiene un punto de fusión bajo. Fluye fácilmente sobre los metales de base y produce depósitos lisos que se pueden limpiar para formar bordes afilados. ... [Leer mas]

El electrodo 60 de Stoody, compuesto de una aleación a base de níquel, cuenta con las mismas propiedades del electrodo 50 de Stoody, pero produce depósitos más duros y más resistentes al desgaste. Certificación confor ... [Leer mas]

El alambre Stoody 965-O está compuesto de una aleación de revestimiento con metal duro para uso general que ofrece un buen equilibrio entre resistencia al impacto y a la abrasión. Puede ser aplicado en aceros al manganeso, ... [Leer mas]

El alambre sin cromo Stoody 968-O para revestimiento con metal duro por arco abierto produce depósitos con igual o mayor resistencia al desgaste y dureza que los depósitos del carburo de cromo convencional. El alambre ... [Leer mas]

OK Tigrod 4047 was originally developed as a brazing alloy to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than OK Tigrod 4043, which provides increased ... [Leer mas]

[Leer mas]